Vintage |
Gallery: Strawberry Cyclesport ![]() ![]() |
Powder coated LAN71 touring fork crown bottom view.
Viewed: 3934 times.
|
Marco's front triangle brass brazed on the Marchetti 301/G-500 brazing fixture. Now tomorrow to soak, sandblast, file the lugs then braze up the rear wishbone triangle and off to paint on Monday.
Viewed: 3921 times.
|
Head lug macro.
Viewed: 3936 times.
|
Seat lug macro.
Viewed: 3839 times.
|
Detail of down tube/bottom bracket brazing. Seat tube and chainstays were previously brazed to the B.B.
Viewed: 3915 times.
|
Marco's frame in progress. Rear wishbone triangle, previously brazed complete with topstay/wishbone/seatstays, is now ready to braze to the back of the seat lug and to the dropouts. The mitre angle between the seat tube and the top stay has been determined directly from the Marchetti brazing fixture and the topstay cap was mitered and then brazed to the topstay. All that remains is to silver braze the topstay binder to the back of the seat lug and the seatstay tips into the dropouts.
Viewed: 4331 times.
|
Detail of the topstay binder and seat tube/seat lug from the rear.
Viewed: 3910 times.
|
Pic of the rear triangle ready for brazing the topstay binder to the seat lug and the seatstays to the dropouts.
Viewed: 4069 times.
|
Marco's frame completed.
Dummy headset installed on the Enve fork as a check on design. Off to paint tomorrow. Viewed: 3819 times.
|
Gallery: Strawberry Cyclesport ![]() ![]() |
![]() |
[RSS] |