Mechanique :: flatmill01
Mechanique navigate UP (accesskey 'U')
First Photo (Accesskey 'F') Previous Photo (Accesskey 'P') 91 of 96 Next Photo (Accesskey 'N') Last Photo (Accesskey 'L')
Jump to:
Tapper bodies have moved from the lathe where a 20 degree chamfer was turned and are back on the Bridgeport milling machine for step no. 11 -milling the flats for the stainless steel handles.  The bodies are secured in the Super Indexing Spacer and a two inch diameter shell endmill is used to machine a 2mm deep x 40mm long flat.

Tapper bodies have moved from the lathe where a 20 degree chamfer was turned and are back on the Bridgeport milling machine for step no. 11 -milling the flats for the stainless steel handles. The bodies are secured in the Super Indexing Spacer and a two inch diameter shell endmill is used to machine a 2mm deep x 40mm long flat.

First Photo (Accesskey 'F') Previous Photo (Accesskey 'P') 91 of 96 Next Photo (Accesskey 'N') Last Photo (Accesskey 'L')
Jump to:
Mechanique navigate UP (accesskey 'U')
Powered by Gallery v1 [RSS]