Bottom Bracket Tap/Face
4 images in this album.
[Slideshow] [Login]
Gallery: Strawberry Cyclesport navigate UP Album: Albums  navigate UP Album: Framebuilding Tools navigate UP (accesskey 'U')
BBT2000 LAN71 B.B. Tap holder complete with arbors and taps.  Manual Bottom Bracket Tapping Set is engineered for Marchetti and Western bottom bracket taps.  The unit is designed and fabricated in the Strawberry Workshop, Portland, Oregon especially for hand tapping steel and titanium bottom bracket shells.  The set measures 300mm x 300mm. and weighs approximately 2.6kg.  The holder bodies are machined from solid 1000 series steel and black oxide treated.  The replaceable arbors with A2 air hardening polished stock secure and align the taps for precision tapping.  New for 2011, Jergens aluminum tapered roller handles incorporating 1/2"x13tpi threaded studs replace the old plastic handles.  The price for the holder alone (including the four tapered aluminum handles) is $295.00 and the price for the complete set including taps is $675.00 EX WORKS.  View this tool at the Strawberry Workshop in the Goose Hollow neighborhood at 1535 S.W. 17th. Ave., Portland, OR.  To order, please contact Andy.  Paypal or good check accepted.  Click twice on photo to enlarge.
BBT2000 LAN71 B.B. Tap holder complete with arbors and taps. Manual Bottom Bracket Tapping Set is engineered for Marchetti and Western bottom bracket taps. The unit is designed and fabricated in the Strawberry Workshop, Portland, Oregon especially for hand tapping steel and titanium bottom bracket shells. The set measures 300mm x 300mm. and weighs approximately 2.6kg. The holder bodies are machined from solid 1000 series steel and black oxide treated. The replaceable arbors with A2 air hardening polished stock secure and align the taps for precision tapping. New for 2011, Jergens aluminum tapered roller handles incorporating 1/2"x13tpi threaded studs replace the old plastic handles. The price for the holder alone (including the four tapered aluminum handles) is $295.00 and the price for the complete set including taps is $675.00 EX WORKS. View this tool at the Strawberry Workshop in the Goose Hollow neighborhood at 1535 S.W. 17th. Ave., Portland, OR. To order, please contact Andy. Paypal or good check accepted. Click twice on photo to enlarge.
Viewed: 7151 times.
BBF2001 LAN71 B.B. Facing mill complete with facer, drawbolt, compression spring & spacer.  Draw bolt and compression spring are on the right hand side of the facing holder and the cutter is at the bottom of the photo.  The cutter is held by two set screws and once the holder is positioned on the tap arbors, the draw bolt and compression spring are placed into the 22mm. socket in the top of the facer body and the bolt is tightened onto the tap arbor.  The LAN71 bottom bracket facing mill complete with cutter  includes one compression spring, one 14mm. aluminum spacer and one arbor draw bolt which secures the mill body to the bottom bracket tapping arbors (not included with the facer - are included with b.b. tapping unit).  The facing holder is machined from solid 1000 series steel round stock and has a black oxide finish.  The cutter is blanked from M2 high speed tool steel, hardened to HRC 63 and then precision ground by McKenzie Tool Grinding of Portland, Oregon.  Design and blanking is carried out in the Strawberry workshop, Portland, Oregon.  The facing mill complete as shown in the photo is $270.00 plus shipping from Portland.  To order, please contact Andy. PayPal and good check accepted.
BBF2001 LAN71 B.B. Facing mill complete with facer, drawbolt, compression spring & spacer. Draw bolt and compression spring are on the right hand side of the facing holder and the cutter is at the bottom of the photo. The cutter is held by two set screws and once the holder is positioned on the tap arbors, the draw bolt and compression spring are placed into the 22mm. socket in the top of the facer body and the bolt is tightened onto the tap arbor. The LAN71 bottom bracket facing mill complete with cutter includes one compression spring, one 14mm. aluminum spacer and one arbor draw bolt which secures the mill body to the bottom bracket tapping arbors (not included with the facer - are included with b.b. tapping unit). The facing holder is machined from solid 1000 series steel round stock and has a black oxide finish. The cutter is blanked from M2 high speed tool steel, hardened to HRC 63 and then precision ground by McKenzie Tool Grinding of Portland, Oregon. Design and blanking is carried out in the Strawberry workshop, Portland, Oregon. The facing mill complete as shown in the photo is $270.00 plus shipping from Portland. To order, please contact Andy. PayPal and good check accepted.
Viewed: 5306 times.
SILVA Art. 067 bottom bracket ream/face cutter.
SILVA Art. 067 bottom bracket ream/face cutter.
Viewed: 4124 times.
SILVA Art. 048 Bottom Bracket tap/chamfer/face complete with BSC taps (pair) and chamfer/face cutters (pair).  Beautiful tool equipped with ball bearing support for chamfer/facing operation.   $1228.00/set.   To order, please contact Andy. PayPal and good check accepted.
SILVA Art. 048 Bottom Bracket tap/chamfer/face complete with BSC taps (pair) and chamfer/face cutters (pair). Beautiful tool equipped with ball bearing support for chamfer/facing operation. $1228.00/set. To order, please contact Andy. PayPal and good check accepted.
Viewed: 5454 times.
Gallery: Strawberry Cyclesport navigate UP Album: Albums  navigate UP Album: Framebuilding Tools navigate UP (accesskey 'U')
Powered by Gallery v1 [RSS]