| | |
|
|
|
|
Marchetti Srl Special Tools.
Marchetti Integrated Bicycle Production Systems (Grassobbio (BG), Italy) wishes to announce two new testing machines: ML 401 XPC Complete Bicycle Testing and ML 501 XPR Bicycle Wheel Testing. These machines carry out safety tests for compliance with the 2006 promologated European Standards for CEN countries. For details, please go to Marchetti's website www.marchettispa.it Sales of Marchetti's larger fixtures and machines are handled directly by Ms. Monica Marchetti, who may be contacted at info@marchettispa.it. If you have questions regarding the special tools, please contact Andy Newlands by email through the Contact link or ring me on 503-224-1215. Thanks.
Viewed: 7839 times.
|
Marchetti Bottom Bracket Taps. HSS+CO B.B. shell tap (36x24(right hand Italian thread)or 34.85 (1-3/8"x24tpi) British right/left hand thread), six flute with 16mm. through bore and 20mm. length with keyway. These taps are designed for the Marchetti Bottom Bracket tapping machines, but work beautifully with the new LAN71 manual tap holders which are now available (go to LAN71 Store). The price (August, 2008) is $410.00/pr. UPS shipping to your cost. View this item at the Strawberry workshop at 1535 S.W. 17th. Ave. and S.W. Market St. in Portland, Oregon. For sales please contact Andy Newlands on 503-224-1215 or email through the Contact link. Visa accepted. Viewed: 3780 times.
|
Marchetti ref. 31 Dropout Aligning Gauge. Just arrived from Italy. Brand new and ready for a good home. The gauge determines the centerline of the rear dropouts in relation to the centerline of the seat tube. View it in action at the Strawberry worksop. Contact Andy on 503-224-1215 or email through the contact link. Cost $650.00 plus shipping. Viewed: 2208 times.
|
| | |
| | |
|
|
|
|
Marchetti cd. Video of mainly automatic bicycle and motorcycle frame machining, bicycle assembly, wheel building and bicycle and wheel testing to CEN Standards. Also includes footage of the Marchetti tool display at the Milan Bicycle and Motorcycle Show. To order please mail a self addressed, stamped envelope. Viewed: 1153 times.
|
ML 307N Marchetti manual frame alignment table. For price quotes on table complete with all accessories or any separate accessory, please ring Andy on 503-224-1215 or email through the contact link. Viewed: 1869 times.
|
ML 307N Marchetti manual frame alignment table detail of ref. no. 35 dropout aligning levers and ref. no. 31 rear triangle alignment gauge. Viewed: 1487 times.
|
| | |
| | |
|
|
|
|
ML 301/G-500 - Jigs for assembling and welding bicycle frames. Quite simple and extremely sturdy jigs have been studied to assemble and weld bicycle frames with all possible geometrical dimensions without moving the frame from the jig. These units are indispensable for designers of both custom made frames and prototypes and necessary for manufacturers of standard frames since they enable to quite easily pass from the smallest to the biggest of frames. Dimensions and angles are easy to set; just a few data are necessary and the jig provides for the remaining ones with the possibility of storing dimensions and tube lengths on a proper chart for an easier repetition of the same frame production. A unique detail of jigs ML 301/G is the fact that they not only have the distance of 500mm. between the frame centerline and the base plate, but that they also rotate 360 degrees around a horizontal axle, wherefore the operator has access to all frame points, even the ones that are quite difficult to weld. The jigs are provided with a pneumatically controlled brake to stop the jig in any optimal position while it rotates. The most important aim of these rotating units is to assemble and weld the frame and its small parts while it is positioned in the jig (this technical condition is especially necessary for steel and aluminum TIG welding), in order to ensure an optimal final frame alignment. For a quotation please contact Ms. Monica Marchetti by email info@marchettispa.it The website is www.marchettispa.it Viewed: 1983 times.
|
ML 301/N frame jig - non rotating. Viewed: 1230 times.
|
Seatstay mitreing using Marchetti's combined tube mitre machine ML 102/M with clamping fixture ML 314. Viewed: 1344 times.
|
| | |
1
