Mechanique :: Torch_File_48_0_50_5
Mechanique navigate UP (accesskey 'U')
First Photo (Accesskey 'F') Previous Photo (Accesskey 'P') 96 of 102 Next Photo (Accesskey 'N') Last Photo (Accesskey 'L')
Jump to:
48 and 50.8 brazed carbide mitre cutters back from Paul Brong Machine.  How to cut through heat treated cycle tube including Reynolds 953 with an ultimate tensile strength range 1750-2050 MPa (254,000 psi - 297,500 psi) in  approximately eleven seconds without a laser.  The hardness of 953 is so close to the hardness of HSS mitre cutters to preclude success.  These brazed carbide cutters are resharpenable and if fractured can be repaired - return to Strawberry.

48 and 50.8 brazed carbide mitre cutters back from Paul Brong Machine. How to cut through heat treated cycle tube including Reynolds 953 with an ultimate tensile strength range 1750-2050 MPa (254,000 psi - 297,500 psi) in approximately eleven seconds without a laser. The hardness of 953 is so close to the hardness of HSS mitre cutters to preclude success. These brazed carbide cutters are resharpenable and if fractured can be repaired - return to Strawberry.

First Photo (Accesskey 'F') Previous Photo (Accesskey 'P') 96 of 102 Next Photo (Accesskey 'N') Last Photo (Accesskey 'L')
Jump to:
Mechanique navigate UP (accesskey 'U')
Powered by Gallery v1 [RSS]